TESTO Saveris Radio Monitoring - Humidity & Temp
Mixing System in a tank
to improve Water Quality
Level Measurements
in Large Sanitary Tanks
Flow Measurement
Non-Intrusive, up to 400°C
Dehumidifiers
Combat excess moisture
Gas Station - underground water supervision
Multipoint air/gas Flowmeters for large lines and stacks
Flow Conditioning Improves Flow Measurement Accuracy & Reduces Process Plant Costs
Type A - Pneumatic / Hydraulic + Fail Safe Air Package
Pressure Relief Valves
Series 2600 Miniflex - Pneumatic
Series 75 / Series 70 - Manual
Series 5200 - Pneumatic
Series 5200E - Electromechanical
Weirflex 70 CSO - Manual / Electromechanical
Y-Flex Diverter - Pneumatic
Slurry Knife Gate Valves

Type A - Pneumatic / Hydraulic
Ideal valves for shut off or control applications that involve abrasive or corrosive slurries, powders, or granular substances.
Actuation of the valve, the pinching action, is accomplished by air or hydraulic pressure placed on the sleeve. Modulating the air pressure within the annular space between the body and the sleeve can open, throttle or close the valve.
The valve body acts as a built-in actuator, eliminating costly pneumatic, hydraulic or electric actuators.
Type A Valves Brochure
Sleeves Brochure
Elastomers
Diamond Seal Brochure
Fail Safe Air Package
Press Release: Lime Systems Need Pinch Valves
Press Release: Years of Abrasive Service

Type A-PRV - Pressure Relief Valve
Type A-PRV Pressure Reducing Valve protects pumps & motors from damage.
It consists of a pinch valve in combination with a pressure gauge.
The pinch valve is installed in a bypass line of a pump. If the pump becomes blocked, the increased pressure forces the valve to open which provides a pressure relief allowing the sewage to bypass the pump until the blockage is cleared. Then the valve resets itself in it’s closed position.
Type A-PRV Valves Brochure
Elastomers
Pump Protection - Pressure Relief

Series 2600 Miniflex - Pneumatic
Manufactured on the same design principles as Type A valve (above), Series 2600 Miniflex valves are designed with threaded end connections, enabling use on small lines (1/8”-2”).
Series 2600 Miniflex Valves Brochure
Elastomers

Series 75 / Series 70 - Manual
Ideal valves for applications that involve abrasive or corrosive slurries, powders, or granular substances.
The heart of this unique valve is the durable, flexible rubber sleeve which is reinforced with high-strength fabric.
The sleeve, which is the only part of the valve exposed to the line process, eliminates maintenance.
The design principle is very simple - two mechanical pinch bars open and close the elastometer sleeve. The pinching action is on centerline, so the valve closes on a smooth venturi and is self-cleaning.
Series 75 Valves Brochure
Series 70 Valves Brochure
Sleeves Brochure
Elastomers
Press Release: Lime Systems Need Pinch Valves

Series 5200 - Pneumatic
Ideal valves for shut off or control applications that involve abrasive or corrosive slurries, powders, or granular substances.
A heavy-duty pinch mechanism positions the sleeve for accurate control over a wide flow range. Particularly in slurry applications, the stroke adjustment allows for fine-tuned flow control as the sleeve wears.
True feedback positioning is accomplished through the direct linkage of the pneumatic positioner to the valve stem shaft. Accurate small-change response signals to the positioner greatly enhances control accuracy.
Series 5200 Valves Brochure
Sleeves Brochure
Elastomers
Press Release: Lime Systems Need Pinch Valves

Series 5200E - Electromechanical
Ideal valves for shut off or control applications that involve abrasive or corrosive slurries, powders, or granular substances.
Series 5200E electrically actuated valves are actuated by AUMA, Limitorque or Rotork electric operators as a standard. Other electric motor operators are also available.
Series 5200E Valves Brochure
Sleeves Brochure
Elastomers
Press Release: Lime Systems Need Pinch Valves

Weirflex 70 CSO - Manual / Electromechanical
The Weirflex 70 CSO is designed to specifically meet the needs of stormwater and combined sewer systems.
The valve features a full-port opening for unobstructed flow when in the open position. To control the rate at which stormwater enters a collection system, the valve is closed from the bottom, creating an adjustable weir. The weir can be closed up to 96% of the total pipeline diameter.
This allows operators to adjust for seasonal rainfall changes, wet-weather conditions, storm events or changing population demands.
Weirflex 70 CSO Brochure
Weirflex Level Control System
Sleeves Brochure
Elastomers

Y-Flex Diverter Valve - Pneumatic
Y-Flex is designed to replace two separate valves and a 'Y' connection, simplifying installation.
Each leg of the diverter can be operated independently of the other leg, in either on-off or modulating mode.
Y-Flex Brochure
Elastomers

Calibrators