Tideflex Duckbill Valves: simple, tough and trusted to prevent backflow
- Low headloss maximises flow
- Rubber duckbill design
- Curved bill standard >450mm
- DN25 -DN2500 standard sizes
- PN10, PN16 or other drilling
- Neoprene & EPDM standard construction
- Slip-on or flange mounting
- 1 year warranty standard - 3 & 5 year available
- 25+ year design life
Tideflex Check Valves are cost-effective because they have a long life span and require no maintenance. Consider the Tideflex track record when making TOTEX decisions for your drainage asset management. Click here for a description of Tideflex Valve Benefits.
Tideflex Series Models
- Tideflex Series TF-1: Flat-bottomed Slip-on Duckbill Valve
- Tideflex Series S35-1: Flat-bottomed Flanged Duckbill Valve
- Tideflex Series S35: Flared Flanged Duckbill Valve
- Tideflex Series TF-2: Flared Slip-on Duckbill Valve
- MeasurIT Series R5: Flared Duckbill Valve with Back Plate
- MeasurIT Series R7F: Flat-bottomed Duckbill Valve with Back Plate
How Tideflex Valves Work
The Tideflex duckbill check valve is a revolutionary design for backflow prevention in drain and sewer systems for wastewater and stormwater drainage. Tideflex non-return valves are the original duckbill valves consisting of a one-piece rubber matrix of numerous natural and synthetic elastomers and ply reinforcement, similar in construction to a truck tyre. The one-way valves operate using line pressure and back pressure to open and close, so no outside energy source is required.
The Tideflex check valve has an extremely low cracking pressure so the valve is self-draining which eliminates standing water and maximizes storage volume (attenuation) in the upstream drainage system. The flat bottom of the TF-1 valve means that it requires less bottom clearance - this means that it can be installed at a lower elevation and thus improve the system driving head. It also eliminates the need to rotate the valve to install it; something that causes several issues and can lead to gaping. The increased bill height of the TF-1 means that the effective open area of the valve is greater and so reduces headloss and improves hydraulic performance compared to standard duckbill valves.
Tideflex check valves are self-clearing of debris and seal tight around obstructions, which makes them an excellent choice for use as a tidal valve on coast / beach outfalls, river outfalls, marine outfalls and in floodplains. This also provides significant savings for sewer systems and treatment plants affected by saltwater intrusion.
Tideflex one-way valves are simple and reliable alternatives to ineffective drainage flap valves and tidal flap valves because they are constructed out of reinforced rubber. Therefore there are no moving parts that can corrode, warp or freeze. Tideflex valves will handle large obstructions without jamming, and there is no gate to be stuck open. This provides peace of mind for stormwater and combined sewer overflow systems designed to provide flood protection for low-lying areas.
Tideflex non-return valves are available in asymmetrical (flat bottom) and inline (Checkmate) models for easy retrofitting to existing drainage systems without any modifications required. Non-standard sizes can be manufactured on request with the smallest possible being 12mm. The curved bill is more resilient than the standard straight bill, reducing headloss across the valve and increasing the sealing area by 50%.
Drainage systems need to be reliable in the long term and meet the design intent 100% of the time, no matter the weather - don't accept second-best when you cannot afford the consequences.
We stock valves made of Neoprene with EPDM wrapping, but other elastomers are available on request for various applications. Neoprene offers excellent resistance to a wide range of effluent substances encountered under general operating conditions, including hydrocarbons, fats, oils, grease, kerosene and methane, while EPDM is chosen for its robust abrasion and UV resistance.
Tideflex check valves have been exposed to extensive independent hydraulic testing since the 1980s and continue to be improved through research and development and ongoing in-house testing along with field studies to validate long term performance. These tests along with Finite Element Analysis modelling have formed the basis of the hydraulic characteristic curves used to design all Tideflex valves to meet the different scenarios and applications presented to us by our clients.
Contact us for more information or fill in our quote form. There are also numerous documents available on our site for download which provide more detailed information. Let us assist you in writing a strong technical specification to ensure you get the product you intended in your design.