KM26 Magnetic Liquid Level Gauge

The standard KM26 MLG provides highly visible level indication with no process fluid in contact with the glass. 

Safe for corrosive, flammable, toxic, high temperature and high pressure applications.

KM26 Brochure 
Application Data Sheet
KM26 Features & Benefits
KM26 Dual Chamber Comparison 
KM26 Bargraph - Eliminates Moisture & Corrosion Problems
Superior Float Design
Application: Power Plants - Feedwater Heater Level Control

AccuTrak AT100 Magnetostrictive Level Transmitter

High accuracy .01% of full scale & simple calibration: Pushbutton or HART Protocol. Never requires re-calibration: Set it and Forget it. 

Loop powered to 75 ft (22 m) probe length. Total and/or interface level measurement. Pressure to 3000 psig (207 bar), Std. 1800 psig (124.1 bar). Temperature range: -320ºF to 800ºF (-196ºC to 427ºC) with options.

AccuTrak AT100 Brochure
Magnetostrictive Level Transmitters - General Brochure 
Application Data Sheet
Flange Designations
Displacer Replacer & External Chamber for Side Tank Mounting 
Need SIL2 Ratings? We've got it!
Certificate: SIL2 - Safety Integrating Levels
Certificate: FMEDA - Failure Mode & Effect Diagnostic Analysis

AccuTrak AT100S Sanitary Magnetostrictive Level Transmitter

High accuracy: 0.01% of full scale & simple calibration: Pushbutton or HART Protocol. Never requires re-calibration: Set it and Forget it. 

Loop powered to 50 ft (15 m) probe length. Pressure to 950 psig (66 bar) and temperature range: -320ºF to 450ºF (-196ºC to 232ºC) with options.

AccuTrak AT100S Brochure
Magnetostrictive Level Transmitters - General Brochure 
Application Data Sheet
Flange Designations
Need SIL2 Ratings? We've got it!
Certificate: SIL2 - Safety Integrating Levels

AccuTrak AT200 External Mounted Magnetostrictive Level Transmitter

Designed to mount externally to KM26 Magnetic Level Gauge or any other level gauge. 

High accuracy: 0.01% of full scale & simple calibration (Pushbutton or HART Protocol); never requires recalibration. Total and/or interface level measurement. Process temperature range: -320ºF to 800ºF (-196ºC to 427ºC) with options. Field replaceable module.

AccuTrak AT200 Brochure 
Magnetostrictive Level Transmitters - General Brochure 
Application Data Sheet
Flange Designations
Need SIL2 Ratings? We've got it!
Certificate: SIL2 - Safety Integrating Levels
Certificate: FMEDA - Failure Mode & Effect Diagnostic Analysis
Application: Power Plants - Feedwater Heater Level Control

KSONIK™ MICRO Ultrasonic Level Transmitter & Switch

The KSONIK™ MICRO Ultrasonic Level Transmitter or Switch is designed to measure liquid (32 ft. / 10 m) and bulk solids (10 ft. / 3 m) levels. 

The MICRO is mounted on top of the vessel or tank. The microprocessor in the MICRO fires an electronic pulse that the transducer converts into an acoustic pulse. The pulse travels to the level that is being measured and is reflected back to the transducer. The transducer then converts the energy back into an electronic signal and stops the counter in the microprocessor, which then knowing the speed of sound through the air, can accurately determine the distance.

The powerful software removes false echoes and the electronic filter removes ambient noise.

Ultrasonic Level Measurement - overview
KSONIK MICRO Brochure 
Application Data Sheet 

KSONIK™ MICRO COMPACT LP Ultrasonic Level Transmitter 'Loop Powered'

The KSONIK™ MICRO Compact Ultrasonic Level Transmitter is designed to measure liquid (13 ft. / 4 m) levels.

Principle of operation of the KSONIK MICRO COMPACT LP is the same as KSONIK MICRO.

Ultrasonic Level Measurement - overview
KSONIK MICRO COMPACT LP Brochure 
Application Data Sheet

KSONIK™ MICRO LP Ultrasonic Level Transmitter 'Loop Powered'

The KSONIK™ MICRO LP Ultrasonic Level Transmitter is designed to measure liquid (16 ft. / 5 m) levels. 

Principle of operation of the KSONIK MICRO LP is the same as KSONIK MICRO.

Ultrasonic Level Measurement - overview
KSONIK MICRO LP Brochure 
Application Data Sheet 

LM80 Laser Level & Positioning Transmitter

The LM80 is a high performance laser transmitter that can accurately measure level, distance and position over long ranges in extreme environments. 

The LM80 features advanced timing and signal processing for pinpoint accuracy at up to 100ft. / 30m (level applications) and to 500 ft. / 150m (positioning applications). 
ATEX approved.


LM80 Brochure 
Application Data Sheet
Application: Mining - Crushers & Surge Bins - Rocks 
Application: Tall & Narrow Silos - Granular Plastics 
References

AccuTrak AT100S Sanitary Magnetostrictive Level Transmitter

High accuracy: 0.01% of full scale & simple calibration: Pushbutton or HART Protocol. Never requires re-calibration: Set it and Forget it. 

Loop powered to 50 ft (15 m) probe length. Pressure to 950 psig (66 bar) and temperature range: -320ºF to 450ºF (-196ºC to 232ºC) with options.

AccuTrak AT100S Brochure
Magnetostrictive Level Transmitters - General Brochure 
Application Data Sheet
Flange Designations
Need SIL2 Ratings? We've got it!
Certificate: SIL2 - Safety Integrating Levels

LM80 Laser Level & Positioning Transmitter

The LM80 is a high performance laser transmitter that can accurately measure level, distance and position over long ranges in extreme environments. 

The LM80 features advanced timing and signal processing for pinpoint accuracy at up to 100ft. / 30m (level applications) and to 500 ft. / 150m (positioning applications). 
ATEX approved.


LM80 Brochure 
Application Data Sheet
Application: Mining - Crushers & Surge Bins - Rocks 
Application: Tall & Narrow Silos - Granular Plastics 
References

MT5000 Guided Wave Radar Level Transmitter

Radar signal travels along the waveguide and this way eliminates false echoes and minimizes signal loss. Provides widest selection of wetted materials. 

Lengths from 0.3m to 61m. No moving parts.

MT5000 Brochure 
Application Data Sheet
Flange Designations
Displacer Replacer & External Chamber for Side Tank Mounting 
Application: Large Sanitary Tanks