FLUXUS® F601 - Portable / for liquids

The FLUXUS® F601 is the successor of the well known ADM 6725, which was famed for its reliability.

An ideal tool for service work and quick control ultrasonic measurements. Its clamp-on flow transducers are simply mounted onto the pipe from the outside and are thus quickly installed, without process interruption and without production stop.

The measurement is pressure independent and can take place on pipes of almost any materials and on almost any liquid. Only two transducer pairs are needed to cover the diameters most common in industrial applications (DN10 to DN2500), the full transducer range covers DN6 to DN6500.

To start the measurement, you only have to mount the transducers on the pipe, enter the pipe and medium parameter and adjust the distance between the transducers as indicated by the meter. No zeroing procedure is necessary.

F601 General Brochure
F601 Technical Specification
5 Minute Flow Meter
Application Data Sheet
Application: River Water - Quick Flow Control in Harsh Conditions
Application: River Water - Flow Measurement at a Pump Station
Application: Process Water - Consumption Measurement
Application: Flow Measurement of Hot Buttermilk

FLUXUS Portable Flow Meter for Gases
other Sanitary/Hygienic Sensors in our offer

FLUXUS® ADM 7407 - Stationary / for liquids

Thanks to its exceptional dual-uP technology, high number of measuring cycles per second and adaptive signal processing, FLUXUS® ADM 7407 produces stable and reliable measuring results even under difficult conditions.

Its clamp-on flow transducers are simply mounted onto the pipe from the outside and are thus quickly installed, without process interruption and without production stop.

The measurement is pressure independent and can take place on pipes of almost any materials and on almost any liquid. The flowmeter is ideal for chemically aggressive media.

FLUXUS ADM General Brochure
ADM7x07 Technical Specification
Application Data Sheet
Application: Wastewater Treatment Plant
Application: Ground Water in Lignite Surface Mining
Application: Thermal Energy Measurement for District Energy
Project: Drinking Water
Project: Wastewater Treatment Plant
Project: Brewery - Optimization of Industrial Energy Systems
Project: Pharmaceutical - Silicon Oil Dosing-Stopper Washing..
Project: Steam Generators
Project: Dam Tunnel
Project: Dam Outlet
Project: Pump Station - River Water
Project: Energy Quantity Measurement for Facility Management
Project: Bitumen
Project: Cogeneration Plant
Project: Fertilizers - Ammonium Nitrate Measurement
Project: Acid Carry-over Recycling

FLUXUS Stationary Flow Meter for Gases
other Sanitary/Hygienic Sensors in our offer

FLUXUS® ADM 5107 - for Water & Wastewater Industry / for liquids

The flowmeter's watertight transducers are small and practical, watertight and equipped with rugged integrated cables. Thanks to the clamp-on technology, no cutting or welding work is needed to mount the transducers on the pipe.

The flowmeter's user interface is automatically adapted to the connected transducers. No zeroing is necessary. Water is pre-selected as medium, it's physical properties are stored in the flowmeter's memory.

In most cases, you only have to enter the pipe's outer diameter and wall thickness as well as the water temperature in order to start the measurement. The commissioning work is thus reduced to a minimum.

ADM 5x07 Technical Specification
Application Data Sheet
Application: Production of Microprocessors

FLUXUS® ADM 8027 - ATEX Approved / for liquids

FLUXUS® ADM 8027 is an ultrasonic flowmeter with IP66 enclosure for permanent installation in explosion-hazard areas. It is ATEX certified for use in zones 1 and 2.

FLUXUS ADM General Brochure
ADM 8x27 Technical Specification
Application Data Sheet
Application: Methanol
Application: Triethylene Glycol
Project: Chemical Industry - Hi-Pressure Flow Measurement
Project: Chemical Industry - Hi-Temperature Flow Measurement
Project: Chemical Industry - MDI Preproduct

FLUXUS ATEX Flow Meter for Gases

WaveInjector® - the solution for extreme temperatures / for liquids

The WaveInjector® enables flow measurement at both very low and very high temperatures (400°C), even in explosion-hazard areas.

It offers you the well known advantage of the clamp-on ultrasonic technology: a non-invasive, pressure and medium independent measurement with a high dynamic range and a high flexibility.

Brochure
Application Data Sheet
Application: Liquefied Natural Gas at -161°C
Press Release: Reliable up to 400°C