Liquid Flow Measurement

We provide clamp on non-invasive liquid flow measurement and flow meter hire/sales services.

The following Flexim flow meters are for hire or sale. Alternatively, we offer on-site testing by our engineers.

Contact us today on +353 1 484 7832 or flowmeters@measurit.com to discuss your requirements.


Click here to view sample flow test reports.

FLUXUS® F601 - PORTABLE / FOR LIQUIDS

Flexim FLUXUS Flow meters - Ultrasonic - for liquids

The FLUXUS® F601 is the successor of the well known ADM 6725, which was famed for its reliability.

An ideal tool for service work and quick control ultrasonic measurements. The clamp-on flow transducers are simply mounted onto the pipe from the outside and are thus quickly installed, without process interruption and without production stop.

The measurement is pressure independent and can take place on pipes of almost any materials and on almost any liquid. The flow meter is ideal for chemically aggressive media.

Only two transducer pairs are needed to cover the diameters most common in industrial applications (DN10 to DN2500), the full transducer range covers DN6 to DN6500.

To start the measurement, you only have to mount the transducers on the pipe, enter the pipe and medium parameters and adjust the distance between the transducers as indicated by the meter. No zeroing procedure is necessary.


FLUXUS® F608 - PORTABLE / FOR liquids in hazardous areas

F608=flowmeter.jpg

The FLUXUS F608 portable liquid flow meter is based on the widely used, highly reliable and versatile F601, but has been specifically engineered for use within hazardous areas and is covered by ATEX, IECEx and FM certification.

It is the ideal solution for liquid flow measurement in potentially explosive areas, may it be for a temporary replacement of a stationary flow meter, check metering or service operations. Due to its certification, users are not obliged to obtain a Hot Work Permit, making the access to ATEX, IECEx and FM Zones much easier and less time consuming.


FLUXUS® F401 - POrtable / for water

Flexim FLUXUS F401 flow meters - ultrasonic - for water

We are excited to bring the FLUXUS® F401 to the Irish market.

FLEXIM have specifically designed the F401 for applications in the municipal water and wastewater sectors. The firmware has a user-friendly menu navigation and is specifically adapted to the needs of the water industry. 
As with the F601, the clamp-on transducers mean that there is no need to enter the piping system or to interrupt supply. Measurement ready in less than 5 minutes. This makes the F401 the ideal tool for service and maintenance activities.

Applications:

  • Clean measurement process for drinking water system
  • Water loss balancing and leak detection
  • Verification of sewage lift station performance
  • Temporary monitoring of distribution and collection systems
  • Verification of pump and valve performance

The F401 is equipped with water-tight IP68 transducers, with the flow transmitter residing inside a IP67 Pelicase. When its internal battery capacity is combined with an additional external battery suitcase, the F401 offers continuous remote measurements outdoors for up to a week. The rugged water-tight transducers and transmitter mean you can have peace of mind when leaving the F401 in the field to do its work.

 The F401 is highly zero point stable and recognizes even the smallest flow rates, which makes it the ideal measurement tool for leak detection.  High measurement accuracy is offered for flow velocities of 0,01 to 25 m/s.

Pipe sizes from 25 mm to 3 m, solid contents of up to 6% by volume, as well as old and rusty steel, badly manufactured GRP or even armoured concrete pipes are not a measurement challenge to the F401.

All this makes the FLUXUS® F401 the superior companion for the daily work of water suppliers, hydrologists and engineering offices.

FLUXUS® F721 - STATIONARY / ATEX APPROVED / FOR LIQUIDS

fluxus-f721-flow-meter.jpg

The F721 is FLEXIM’s next generation of advanced non-invasive ultrasonic flow metering for liquids and gases. Besides its new look, it boasts a completely re-designed hardware platform with a 32 bit embedded ARM processor for powerful signal processing. This allows for accurate and reliable measurement at even the most difficult applications.

Offering a far better signal to noise quality, a greater measurement range, signal improvements giving better signal evaluation and processing, nearly 10-fold faster measurement cycles than its predecessor, the FLUXUS 70X, and virtually unlimited data storage, the 721 flow meter surpasses any other non-intrusive ultrasonic flowmeter in terms of accuracy, reliability and versatility. Even low flows down to only a few litres per hour can be recorded accurately.

The F721 offers non-intrusive flow measurement of virtually any kind of liquid or gas, from the smallest tubing to the largest penstock, independent of the pressure inside the pipe and over a very large temperature range. This makes it the flowmeter of choice for a very wide range of applications in virtually any industrial sector, and is especially useful for measurements related to energy efficiency.

 

FLUXUS® ADM 7407 - Stationary / for liquids

FLUXUS® ADM 7407 - Stationary / for liquids

Thanks to its exceptional dual-uP technology, high number of measuring cycles per second and adaptive signal processing, FLUXUS® ADM 7407 produces stable and reliable measuring results even under difficult conditions.

Its clamp-on flow transducers are simply mounted onto the pipe from the outside and are thus quickly installed, without process interruption and without production stop.

The measurement is pressure independent and can take place on pipes of almost any materials and on almost any liquid. The flow meter is ideal for chemically aggressive media.

 

FLUXUS® ADM 5107 - for Water & Wastewater Industry / for liquids

FLUXUS® ADM 5107 - for Water & Wastewater Industry / for liquids

The flowmeter's watertight transducers are small and practical, watertight and equipped with rugged integrated cables. Thanks to the clamp-on technology, no cutting or welding work is needed to mount the transducers on the pipe.

The flow meter's user interface is automatically adapted to the connected transducers. No zeroing is necessary. Water is pre-selected as the medium, and it's physical properties are stored in the flow meter's memory.

In most cases, you only have to enter the pipe's outer diameter and wall thickness as well as the water temperature in order to start the measurement. The commissioning work is thus reduced to a minimum.

 

FLUXUS® ADM 8027 - ATEX Approved / for liquids

FLUXUS® ADM 8027 - ATEX Approved / for liquids

FLUXUS® ADM 8027 is an ultrasonic flowmeter with IP66 enclosure for permanent installation in explosion-hazard areas. It is ATEX certified for use in zones 1 & 2.

 

 

WaveInjector® - the solution for extreme temperatures / for liquids

WaveInjector® - the solution for extreme temperatures / for liquids

The WaveInjector® enables flow measurement at both very low and very high temperatures (400°C), even in explosion-hazard areas.

It offers you the well known advantage of the clamp-on ultrasonic technology: a non-invasive, pressure and medium independent measurement with a high dynamic range and a high flexibility.